Nominal Wall Thickness for 3'' Sch 80 Elbow and Tee 2 - Eng-Tips

nuk4,
Most of the fittings are based upon a specific code as per the schedule of the pipe. ANSI has a lot of standard for these types of fittings. Butt Weld Elbows & Tees are covered under ASME/ANSI 16.9. If you specify this in your purchasing documents, you can then rest assured that your specified fittings are equal to or better than your pipe in strength. Hope this helps as you did not state why you need this wall thickness. I assumed that you were doing stress calcs.

Chris Foley
Midland, TX nuk4,
In this case, I would suggest that you buy these codes. I can't ever remember seeing a wall thickness requirement for a fitting of this type (that does not mean that they do not exsist). I have seen this for fittings "created" in the field as found in the ASME BPVC. I might suggest that you get with your supplier and see if they can help you out. I am sure that a supplier like Weldbend will get you the information that you need.

Chris Pretty much by definition, an ell or (especially) tee must have a thicker wall than the corresponding pipe. If you are making a connection by stubbing one pipe into another, you'd do some area reinforcement calc's and probably add a repad (or more likely, use an integrally reinforced branch fitting such as a weldolet). So why would you expect a tee to have the same nominal thickness as the piping with no reinforcement. Ells are similar in that if you model their thickness as uniform, their stress distribution varies depending on location. So the fabricators have some incentive to optimize their designs to save a few ounces of steel per fitting which adds up to big bucks.

As to codes/standards, B16.9 does not specify thickness. from paragraph 2.2, Design of Fittings, "The design of fittings shall be established by mathematical analysis... contained in nationally recognized pressure vessel or piping codes, or at the manufacturer's option by proof testing in accordance with paragraph 9 of this Standard. In order to meet design or manuacturing requirements, it is expected that some portion of formed fittings may have to be thicker than the pipe wall with which the fitting is intended to be used..."

As to the original issue of a fitness for service analysis, if you're really concerned, then a FEA with at least shell elements (not beam elements like Caesar II) would be called for. I'd use Section VIII-2 acceptance criteria, unless you're in Section III territory.

jt First off, Weldbend's catalog shows the wall thickness of their ells and tees. It is the same as pipe.

I would assume that they mean this as the "minimum" thickness and that any additional thickness which may be present would be to allow them to maintain the minimum thickness after forming. They show the thickness tolerance as +0.12", -0.0" for 18" and smaller, +.019", -0.0" for 20" and 24".

Weldbend does show pressure ratings for fittings "based on code for pressure piping." "Ratings apply in accordance with Sections 1 and 5 of the code for pressure pipe."

nuk4,

Generally, the wall thickness of your tees and elbows will match the pipe. As mentioned above, in reality these fittings will be a little thicker than the pipe. The forged tees have integral reiforcement built in and the blank for forming elbows may be a little thicker to compensate for thinning during forging, but you will specify them by the wall thickness that you require based on straight pipe wall thickness calculations.

Nobody has mentioned materials yet, the statement above assumes that your fittings are equivalent (same allowable stresses) to your pipe.

In services where the Pipeline Codes, B31.4 & B31.8, are used, it's not unusual for your pipe and fittings to have different allowable stresses. Sometimes high strength pipe is used with weaker fittings that are a thicker wall. Also, with pipe bends that are commonly used with these codes, the thinning during manufacture does need to be addressed when purchasing a bend.

NozzleTwister
Houston, Texas Many kudos for all your response! In reality, tees and elbows are a little thicker than the same welded/seamless carbon steel[austenitic steel] pipe of the same pipe schedule {this can be verified when measured using the DM4 DL [krautkramer]thickness Gage}. For example,3''Sch 160 has the following wall thickness data:
a)pipe = 11.13mm
b)Elbow = 12.52mm
c)Tee = 12.52mm
For b] and c] the assumption is that the mill tolerance is 12.5% .Therefore the wall thickness for the elbow and tee is obtained by finding 1/8th of 11.13mm and then adding to 11.13mm to obtain the corresponding wall thickness.I find this difficult since am unable to see this in any of the ASME/ANSI applicable codes, or has anybody a clue to this? Am worried since the integrity of individual components when combined in a piping system needs to be checked to ensure that not only the individual components are fit to purpose but also the piping system as a whole.
nuk4-

You mentioned that you are assessing corroded components. In this case, you can refer to API-579 sections 4 )and maybe 5) and appendix A.5.5 (for elbows). Formula A.193 provides a minimum thickness of an elbow as a function of the pipe diameter, bend radius, and circumferential location on the elbow. Section 4 comes into play to evaluate whether your particular thickness profile will work. Not as easy to read and plug and chug as say B31.3 but it can be done!

jt

Reducer:
The steel pipe reducer serves as a vital pipeline component, enabling the seamless transition from larger to smaller bore sizes in accordance with inner diameter specifications.

Pipefun are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Two primary types of reducers exist: concentric and eccentric. Concentric reducers effectuate symmetrical bore size reduction, ensuring alignment of connected pipe centerlines. This configuration is suitable when maintaining uniform flow rates is critical. In contrast, eccentric reducers introduce an offset between pipe centerlines, catering to scenarios where fluid levels need equilibrium between upper and lower pipes.

Reducers play a transformative role in pipeline configuration, facilitating smooth transitions between pipes of varying sizes. This optimization enhances overall system efficiency and functionality.

Elbow:
The steel pipe elbow holds a pivotal role within piping systems, facilitating changes in fluid flow direction. It finds application in connecting pipes of either identical or varying nominal diameters, effectively redirecting the flow along desired trajectories.

Elbows are categorized based on the degree of fluid direction alteration they introduce to pipelines. The commonly encountered angles include 45 degrees, 90 degrees, and 180 degrees. For specialized applications, angles like 60 degrees and 120 degrees come into play.

Elbows fall into distinct classifications based on their radius relative to pipe diameter. A Short Radius Elbow (SR elbow) features a radius equal to the pipe diameter, making it suitable for low-pressure, low-speed pipelines, or confined spaces where clearance is at a premium. Conversely, a Long Radius Elbow (LR elbow), with a radius 1.5 times the pipe diameter, finds application in high-pressure and high-flow-rate pipelines.

Elbows can be grouped according to their pipe connection methods—Butt Welded Elbow, Socket Welded Elbow, and Threaded Elbow. These variations offer versatility based on the joint type employed. Material-wise, elbows are crafted from stainless steel, carbon steel, or alloy steel, adapting to specific valve body requirements.

Types of Steel Pipe Tee:
● Based on Branch Diameters and Functions:
● Equal Tee
● Reducing Tee (Reducer Tee)

Based on Connection Types:
● Butt Weld Tee
● Socket Weld Tee
● Threaded Tee

Based on Material Types:
● Carbon Steel Pipe Tee
● Alloy Steel Tee
● Stainless Steel Tee

Applications of Steel Pipe Tee:
● Steel pipe tees are versatile fittings that find applications in various industries due to their ability to connect and direct flows in different directions. Some common applications include:
● Oil and Gas Transmissions: Tees are used to branch off pipelines for transporting oil and gas.
● Petroleum and Oil Refining: In refineries, tees help manage the flow of different products during refining processes.
● Water Treatment Systems: Tees are used in water treatment plants to control the flow of water and chemicals.
● Chemical Industries: Tees play a role in chemical processing by directing the flow of different chemicals and substances.
● Sanitary Tubing: In food, pharmaceutical, and other industries, sanitary tubing tees help maintain hygienic conditions in fluid transport.
● Power Stations: Tees are used in power generation and distribution systems.
● Machines and Equipment: Tees are integrated into various industrial machinery and equipment for fluid management.
● Heat Exchangers: Tees are used in heat exchanger systems to control the flow of hot and cold fluids.

Steel pipe tees are essential components in many systems, providing flexibility and control over the distribution and direction of fluids. The choice of material and type of tee depends on factors such as the type of fluid being transported, pressure, temperature, and the specific requirements of the application.

If you are looking for more details, kindly visit forged carbon steel elbow.

A steel pipe cap, also referred to as a steel plug, is a fitting used to cover the end of a pipe. It can be welded to the pipe's end or attached to the external thread of the pipe. Steel pipe caps serve the purpose of covering and protecting pipe fittings. These caps come in different shapes, including hemispherical, elliptical, dish, and spherical caps.

Shapes of Convex Caps:
● Hemispherical Cap
● Elliptical Cap
● Dish Cap
● Spherical Cap

Connection Treatments:
Caps are used to cut off transitions and connections in pipes. The choice of connection treatment depends on the specific requirements of the application:
● Butt Weld Connection
● Socket Weld Connection
● Threaded Connection

Applications:
End caps have a wide range of applications across industries such as chemicals, construction, paper, cement, and shipbuilding. They are particularly useful for connecting pipes of different diameters and providing a protective barrier to the pipe's end.

Types of Steel Pipe Cap:
Connection Types:
● Butt Weld Cap
● Socket Weld Cap
● Material Types:
● Carbon Steel Pipe Cap
● Stainless Steel Cap
● Alloy Steel Cap

A steel pipe bend is a type of pipe fitting used to change the direction of a pipeline. While similar to a pipe elbow, a pipe bend is longer and is typically manufactured for specific requirements. Pipe bends come in various dimensions, with different degrees of curvature, to accommodate different turning angles in pipelines.

Bend Types and Efficiency:
3D Bend: A bend with a radius three times the nominal pipe diameter. It is commonly used in long pipelines due to its relatively gentle curvature and efficient directional change.
5D Bend: This bend has a radius five times the nominal pipe diameter. It provides a smoother change in direction, making it suitable for extended pipelines while maintaining fluid flow efficiency.

Compensating for Degree Changes:
6D and 8D Bend: These bends, with radii six times and eight times the nominal pipe diameter respectively, are used to compensate for small degree changes in the pipeline direction. They ensure a gradual transition without disrupting flow.
Steel pipe bends are vital components in piping systems, allowing for directional changes without causing excessive turbulence or resistance in fluid flow. The choice of bend type depends on the specific requirements of the pipeline, including the degree of change in direction, available space, and the need to maintain efficient flow characteristics.

At Womic Steel, we understand the importance of secure packaging and reliable shipping when it comes to delivering our high-quality pipe fittings to your doorstep. Here's an overview of our packaging and shipping procedures for your reference:

Packaging:
Our pipe fittings are carefully packaged to ensure they reach you in perfect condition, ready for your industrial or commercial needs. Our packaging process includes the following key steps:
● Quality Inspection: Before packaging, all pipe fittings undergo a thorough quality inspection to confirm they meet our stringent standards for performance and integrity.
● Protective Coating: Depending on the type of material and application, our fittings may receive a protective coating to prevent corrosion and damage during transportation.
● Secure Bundling: Fittings are bundled together securely, ensuring they remain stable and protected throughout the shipping process.
● Labeling and Documentation: Each package is clearly labeled with essential information, including product specifications, quantity, and any special handling instructions. Relevant documentation, such as certificates of compliance, is also included.
● Custom Packaging: We can accommodate special packaging requests based on your unique requirements, ensuring your fittings are prepared exactly as needed.

Shipping:
We collaborate with reputable shipping partners to guarantee reliable and timely delivery to your specified destination.Our logistics team optimizes shipping routes to minimize transit times and reduce the risk of delays.For international shipments, we handle all necessary customs documentation and compliance to facilitate smooth customs clearance.We offer flexible shipping options, including expedited shipping for urgent requirements.

The company is the world’s best ansi b16 9 fittings supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.