4 Advice to Choose a Sectional Matrix Band

★ BEST CHOICE: Strata-G Wide prep ring, Firm Band (See recommended technique)
Pros: Smaller size. Nitinol wire increases life span.
Cons: Limited application. Not recommended for basic Class II.

Check now

OPTION 2: 3D Fusion wide prep ring, Firm Band (See recommended technique)
Pros: Similar performance to Strata-G.
Cons: Larger than Strata-G. Strata-G lasts longer

OPTION 3: ReelMatrix
Pros: For teeth too broken down for a sectional matrix system
Cons: Less ideal contour and contact to a sectional matrix solution.

★ BEST CHOICE: Quad Ring, Quad Wedge, Firm Band
Pros: Split tip wedge sits deep in sulcus and less likely to be pushed up by the gingiva.
Cons: N/A

OPTION 2: Strata-G Ring, Strata-G Wedge and Firm Band
Pros: Strata-G wedge sits deeper than other wedges.
Cons: Strata-G wedge does not sit as deep as Quad.

★ BEST CHOICE: Anterior Fusion (See recommended technique)
Pros: Natural emergence profile and interproximal contours.
Cons: Learning curve. Shape may not be approporiate for all teeth (i.e. bulbous). Not cure through.

OPTION 2: Vari-Strip
Pros: Simple. Cure through.
Cons: Susceptible to deformation during use.

★ BEST CHOICE: Anterior Fusion (See recommended technique)
Pros: Natural emergence profile and interproximal contours.
Cons: Learning curve. Shape may not be approporiate for all teeth (i.e. bulbous). Not cure through.

OPTION 2: Vari-Strip
Pros: Simple. Cure through.
Cons: Susceptible to deformation during use.

★ BEST CHOICE: ReelMatrix, Deep Margin Elevation band (P/N RM500H)
Pros: Ability to seal very deep lesions. Lightweight, retainerless.
Cons: Will not restore whole tooth. Step 1 of a two step process.

OPTION 2: Deep Margin Elevation Tofflemire Band (P/N SMT500H10) with a standard tofflemire retainer
Pros: Ability to seal deep very deep lesions.
Cons: Retainer can torque the band out of position.

★ BEST CHOICE: ReelMatrix
Pros: Circumferential band can be placed without the presence of adjacent dentition. Retainerless bands allow for simulataneous multi-tooth restoration.
Cons: N/A

OPTION 2: Tofflemire Slickbands
Pros: Circumferential band can be placed without the presence of adjacent dentition
Cons: Retainer can torque the band out of position. Cannot perform simulataneous multi-tooth restorations.

★ BEST CHOICE: ReelMatrix
Pros: Circumferential band can be placed without the presence of adjacent dentition. Retainerless bands allow for simulataneous multi-tooth restoration.
Cons: N/A

OPTION 2: Tofflemire Slickbands
Pros: Circumferential band can be placed without the presence of adjacent dentition
Cons: Retainer can torque the band out of position. Cannot perform simulataneous multi-tooth restorations.

★ BEST CHOICE: Quad Universal Ring, Quad Wedge, Strata-G pedo band
Pros: Greater adaptability to different shaped teeth. Wedge sits deeper in the sulcus and less pressure on gingiva.
Cons: Learning curve 

OPTION 2: ReelMatrix
Pros: Speed
Cons: Less ideal contour and contact to a sectional matrix solution.

★ BEST CHOICE: Strata-G Universal Ring
Pros: Retention capability
Cons: May not retain in all circumstances. 

OPTION 2: 3D Fusion Universal Ring
Pros: Similar retention capability to the Strata-G.
Cons: May not retain in all circumstances.

COTISEN supply professional and honest service.

OPTION 3: ReelMatrix
Pros: ReelMatrix will work where a sectional matrix ring will not grip appropriately.
Cons: Less ideal contour and contact to a sectional matrix solution.

A dental matrix is a band that adapts to the surface of the tooth to be restored and reproduces the anatomical contours, replacing the missing wall or walls and containing the restorative material to give it a anatomical shape to the interproximal walls and obtain adequate contact points.

Sometimes choosing a matrix band is not an easy task and that is why in this article we want to tell you how you can select the most appropriate one for each of your clinical cases and what are the factors to consider in your choice. Are you ready?

The use of matrices in dentistry

The use of matrices in dentistry allows teeth to be reconstructed according to their original morphology, maintaining their shape, contour and contact points, in order to preserve their function. This important work is carried out by restorative dentistry, which over time has invested its efforts in the development of new techniques and materials that facilitate this task. Among these developments we find the matrix systems, which we will talk about in this article. But first things first.

Why are touchpoints important?

The interdental or interproximal area, that is, between tooth and tooth, is formed by the contact area or relationship, the interproximal niche and the interdental papilla that occupies this space in the form of a triangle. The contacts between the teeth, called interproximal contacts, have the function of protecting the soft tissues and when they are not present, food packing occurs that damages the gingival tissues, causing diseases such as gingivitis and periodontitis. In addition, a correct contact between the teeth favors the stability of the arches through the combined anchorage. So how can we get functional contacts and contours? Dental matrices are the solution.

What are the functions of dental matrices?

• Preserve the restorative material, preventing it from spilling over.
• Restore the anatomy of the tooth, helping to reconstruct its contact relationship and the lost contour.
• Restore the biological function of the tooth and protect the supporting tissues, avoiding injuries.
• Contribute to the surface finish, achieving a non-retentive surface for plaque or food debris.
• Reduce the probability of secondary caries.
• Increase the useful life of composite restorations.
• Protect the neighboring tooth during a cavitary preparation procedure.

Types of dental matrices

There is a wide variety of types of dental matrices on the market that we can classify according to:

• Material: Metal matrices made of steel, bronze, titanium, etc. or plastic matrices such as acetate or celluloid, which, although less resistant, allow the passage of photopolymerization light.
• Materialization : Universal matrices manufactured in a standardized manner such as Tofflemire matrices or individual matrices that are made by the dentist on a case-by-case basis, for example, individual Hollemback matrix.
• Manufacturing: There are shaped matrices that cannot be modified due to their elastic memory and, on the other hand, there are laminated matrices that can be modified to improve the contour and the point of contact.
• Adaptation system: There are matrices that do not require a matrix holder and do not lose their stability and rigidity and others, on the other hand, do need a matrix holder for proper adaptation.

What should a dental matrix ideally look like?

• It must be rigid, in such a way that it allows its proper insertion in the interproximal areas.
• It must be compatible with the restorative materials, for example, you must be careful with the chemical incompatibility of materials such as celluloid matrices, which can inhibit the setting reaction of acrylic resins. You should also pay attention to physical-chemical incompatibilities, as in the case of some adhesives that can adhere the restorative material to the matrix, preventing its subsequent detachment without removing the filler material. Therefore, it is necessary to pack the inner side of the matrix to avoid this problem.
• It should be easy to adapt to the contour of the tooth, this functionality is linked to the flexibility of the dental matrix to envelop the tooth with the minimum amount of pressure.
• It must be able to contour and be flexible, this will facilitate its perfect adaptation to the edges of the restoration.
• It must be resistant to condensation pressure, that is, it must not slip and must remain in the place where we have placed it.
• It should be easy to remove and have the minimum thickness to avoid excessive separation between adjacent teeth.

Dental matrix systems

You probably know many dental matrix systems and are using one or two of them. Next, we will talk about some systems, from the most common and well-known to other more innovative ones that you may not know yet and are worth trying. Do you dare?.

Tofflemire Matrix Holder System

As you can see, we start with a classic. This universal matrix system was created by Dr. Benjamin Franklin Tofflemire in and is still in use today. The Tofflemire system is indicated to restore interproximal surfaces, class II cavities and mesio-occluso-distal (MOD) cavities, in both permanent and deciduous posterior teeth.

It has several advantages, among which we can mention the possibility of using matrix bands of different widths, it can be separated from the band before removing it, it can be used with curved bands and, in addition, it can be It can be positioned both vestibularly and palatally.

Medicaline Tofflemire universal matrix holder

Garrison Composi-Tight 3D Fusion Sectional Matrix System

Do you have difficult class II cases? The Composi-Tight 3D Fusion Sectional Matrix System could be the ultimate solution for predictable results and we'll tell you why.

The Composi-Tight 3D Fusion sectional matrices provide tight and perfect contacts thanks to their advanced design, in addition this system has rings with Soft Face technology to fit the extra-soft matrices to the contour of the tooth to help you perform a perfect restoration without the matrix moves out of place. This Garrison matrix system is highly intuitive and easy to use, with features that will make your job easier and more efficient.

Composi-Tight 3D Fusion Firm Matrix: Garrison Sectional Matrix Kit

Garrison Strata-G Sectional Matrix System

Garrison's Strata-G Sectional Matrix System provides an anatomical 270º Seal that prevents burrs and over-contoured margins.

The Strata-G system has been specially designed for the creation of perfectly anatomical and narrow contact points in class II composite restorations. The sectional matrix bands ensure the reconstruction with the proper anatomy on the tooth, while the three models of rings create the necessary separation between the teeth for the adaptation of the bands, obtaining as a result a natural and close contact.

Strata-G: Garrison Sectional Matrix Kit

Ultradent Halo Sectional Matrix System

The Ultradent Halo sectioned matrix system provides an ideal separation between the teeth, thanks to the design of its ring that fits with high precision and the wedge that provides an active and always careful separation with soft tissues. In addition, the bands are perfectly designed to give the tooth a natural contour, thus providing uniform and precise contact points.

Perhaps the most distinctive advantage of this innovative matrix system is that the wedges are active, that is, they work by separating the teeth in a comfortable way for the patient. Another interesting advantage is that the ring of the Halo system is universal, this means that you only have to use one ring for both molars and premolars.

Halo Sectional Matrix System: Ultradent Original Band Kit

In conclusion, making a good point of contact is a difficult task and remains a challenge for today's restorative dentistry, but fortunately in our times we have matrix systems very capable of achieving them and which have surpassed the classic Tofflemire matrix holder, which has the drawback of generating axial emergence profiles that are not very anatomical, straight and difficult to improve.

The sectional matrix systems are a great alternative, which, although they have a higher cost, are also their benefits, since they allow a better fit in interproximal spaces to achieve a better point of contact. contact and a more natural and anatomical contour.

Thanks for reading! Did you like our article? If you want to always be up to date with the latest advances in dentistry, don't forget to follow us on our social media. For any question or comment, do not hesitate to write to us. See you soon!

Contact us to discuss your requirements of Sectional Matrix Band. Our experienced sales team can help you identify the options that best suit your needs.