Automotive Driveshaft Components - Pat's Driveline

Flange Yokes

Pat’s Driveline stocks an extensive line of automotive Flange Yokes to fit domestic and import vehicles with the capability to manufacture for custom applications.

Jundi are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Flange Yokes are commonly used to connect a driveline to the Companion Flange on the transmission, transfer case or differential in a variety of vehicles. They are also used on auxiliary powered equipment attaching to pto, pump, compressor and blower input or output shafts.

Pat’s Driveline’s extensive inventory includes OEM replacement Flange Yokes made by Spicer, AAM, Saginaw, Neapco, Rockford Drive Line, Quality Gear, Meritor as well as many others.

They are available in a variety of bolt patterns, pilots, bolt hole diameters and designs. Some of the available driveline series are:

• , , , , , , ,
• , , , , 3R
• ,
• Import, Metric and others.

We stock conversion Flange Yokes for use when a double cardan constant velocity driveshaft is required in place of an OEM design driveline. Flange Yokes are also available to facilitate the removal of a constant velocity joint when that is required.

Slip Yokes

Driveline Slip Yokes are used in a couple different ways;

• As part of a driveline’s length compensation within the driveshaft itself (Inboard),
• Or for slip travel external to the driveshaft (Outboard), typically on the output of the transmission or transfer case.

Pat’s Driveline has stock on driveline Slip Yokes for all driveline series and applications.

• This includes , , , , , , , , , , 3R, , , Toyota, Nissan, Suzuki, Mazda and other Metric series.
• For vehicles made by Chevrolet, GM, Ford, Dodge, Toyota, Nissan, Suzuki, Mazda, Subaru and many others.

The Slip Yoke within a driveshaft that is used for length compensation (Inboard) is a part that experiences wear during operation. Therefore it is important that you use a quality part when building a new driveshaft or replacing a worn component. Pat’s Driveline supplies only the highest quality Slip Yokes for your vehicle or custom application.

Slip Yokes are often used when connecting to transmission and transfer case output shafts (Outboard). This is an important part of the driveline as it also provides the sealing surface for the internal lubrication of these units. At Pat’s Driveline we have an extensive inventory of outboard Slip Yokes for all automotive applications.

Whether it’s an Inboard Slip Yoke or Outboard Slip Yoke, trust Pat’s Driveline to supply the right part for your requirement.

End Yokes

The End Yoke is a vital attachment point of the driveshaft within any drivetrain. It important that it is of high quality in both concentricity and balance. This ensures that the driveshaft has maximum longevity and operates smoothly. Pat’s Driveline’s inventory of automotive End Yokes is extensive. We stock End Yokes to fit transmissions, transfer cases, differentials, power take offs and auxiliary equipment.

There are a few methods of retaining the u-joint into the End Yoke utilized by component manufacturers.

• U-bolt
• Bearing Strap
• Bearing Cap

End Yokes used on transmissions and differentials are generally splined, using either a straight cut or involute spline design. They are often designed specifically for the drivetrain component. Pat’s Driveline can also supply a new End Yoke thru measuring your existing part. End Yokes are available for standard universal joint driveshafts and often for the connection of a double cardan (constant velocity) joint. End Yokes can be supplied for the conversion of OEM designed drivelines to a universal joint driveshaft in many SUV and 4X4 applications.

For more Flange Yoke manufacturerinformation, please contact us. We will provide professional answers.

We also carry keyed round bore End Yokes for auxiliary equipment such as pumps, blowers, compressors and other shaft driven equipment. These are available in straight round bores, or tapered round bores. Custom round bore End Yokes are available from Pat’s Driveline to fit your specific auxiliary drive application.

End Yokes are available in all series including:

• , , , , , , ,
• 3R, , and others
• Toyota, Nissan, Metric

Weld Yokes

Weld Yokes are an integral part of the driveshaft and must be in good condition and structurally sound to provide proper u-joint operation and longevity. At Pat’s Driveline we can supply the correct Weld Yoke for your application and install it in our Service Shop if necessary. Weld Yokes are available in a standard u-joint application as well as for constant velocity (CV) joints. In these cases the weld yoke will have either a pin for the centering ball or a socket to house the centering kit.

Pat’s Driveline inventories Weld Yokes for all sizes of tubing and series of drivelines. In stock are Weld Yokes for u-joint series including:

• , , , , , , , , , ,
• 3R, ,
• Toyota, Mazda, Nissan, and others.

Chomoly Weld Yokes are available for high performance driveshafts. Aluminum Weld Yokes are in stock to repair your existing driveshaft or manufacture a replacement or custom aluminum driveshaft.

Splined Slip Stubs

Quality Splined Slip Stubs are an essential part of a driveshaft’s length compensation and Pat’s Driveline stocks an extensive inventory of Splined Slip Stubs. In stock are Splined Slip Stubs in a variety of splines, lengths and tube sizes.

Splines:

• 250-16 spline
• 1.375-16 spline
• 1.375-32 spline
• 1.500-16 spline
• 1.-16 spline
• 1.750-16 spline and many others

Tube Sizes:

• 750X.065” to 4.000X.083”

Most Splined Slip Stubs in our inventory have a Glidecote®, Dura-Slip® or Polyglide® coating for low friction contact with the Slip Yoke. This ensures the thrust load caused by the driveshaft’s length compensation under load is low. Specialty Splined Stubs are available with increased spline size and/or more spline length for added driveshaft slip travel. Many options are available for custom 4X4 driveshaft applications.

Special Yoke Shafts are available from Pat’s Driveline. Aluminum Yoke Shafts are stocked as replacement parts for OEM driveshafts found in Mustangs and Camaros. Pat’s Driveline uses aluminum Yoke Shafts to build custom driveshafts for hotrods and other projects where length compensation is required, but light weight and performance is important. Pat’s Driveline inventories Yoke Shafts for applications where the addition of a constant velocity is required for lifted 4X4.

Pat’s Driveline stocks Yoke Shafts in quality brands like AAM, Spicer, Neapco, Quality Gear, Rockford Drive Line and other OEMs.

Action Machine Inc. is a distributor of high quality flange yokes.

Use the filters below to help narrow your selection. 
Free shipping on all orders over $100.00 within the USA.